SKU: W12928

Push Tamper 58.5mm - Black Color

Manufacturer: Clockwork Espresso
SKU: W12928

Push Tamper 58.5mm - Black Color

DESCRIPTION

PUSH is a multi-award winning adjustable coffee tamper which guarantees a perfectly level and repeatable tamp for every user. It is the only coffee tamper developed with and tested by independent ergonomics experts and has been shown to significantly reduce the risk of injury to baristas.
Not in stock
155.00€ 125.00€ Without Vat

Phone delivery

+30 2741 027 446

Free shipping

With purchases over 100€

OVERVIEW
CLOCKWORK ESPRESSO · Push Tamper

Clockwork Push Tamper 58.5 mm Black

58,5 mm espresso tamper with black anodised aluminium handle, for an even, level tamp every time.

O 58,5 mmBlack anodised aluminium handleFlat base

Espresso tamper with a 58,5 mm diameter, black anodised aluminium handle and flat stainless steel base. Fits 58 mm portafilters, ideally with precision baskets such as IMS and VST.

With the Push Tamper you always tamp with the same force and always level. The innovative design and large 58.5 mm diameter give very high tamping repeatability.

A proper tamper is the tool you use for every single espresso. The base with its accurate diameter compresses the coffee evenly across the whole surface, while the ergonomic handle lets you tamp firmly and level without straining your wrist. The result is less channeling, a more even extraction and espresso you can repeat.

Why tamping makes or breaks espresso

In espresso, water passes at about 9 bar through a bed of ground coffee just a few millimetres deep. Water always follows the path of least resistance. If the coffee is looser in one spot or the surface is tilted, water rushes through there. This is called channeling and produces espresso that is sour and bitter at the same time.

The tamper has a simple but critical job: to compress the coffee into an even, level puck with no gaps. A good tamper of the right diameter covers the whole basket, leaves no coffee on the walls and helps you tamp level, the same way every time.

How to choose the right diameter

The tamper diameter should match the basket, not just the machine name. Most professional and many home portafilters are 58 mm. For precision baskets (IMS, VST, Pullman etc.) with slightly wider walls, a 58.35–58.55 mm tamper gives the best fit, with a gap of only a few tenths of a millimetre.

Other common sizes are 57 mm (e.g. Lelit 57, Cimbali), 53–54 mm (e.g. San Marco, La Spaziale, Breville/Sage 54) and 49–51 mm for lever machines or small portafilters. If you are not sure, measure the inner diameter of the basket at the top rim or send us your machine model.

How the Push Tamper works

The Push Tamper has an outer ring that rests on the portafilter rim and an inner base that always goes down to the same depth. You push the handle until it bottoms out, and the coffee is always tamped the same way and perfectly level.

Because the depth is fixed, your dose should be weighed and consistent. Set the depth once for your recipe and every espresso after that is repeatable.

Key features

58,5 mm diameter
Accurate fit in the basket for an even tamp right up to the walls.
Base
Flat stainless steel base, for the most even coffee puck.
Handle
Black anodised aluminium handle, light, durable and easy to clean.
For everyday use
Sturdy build for daily use at home or in the cafe.

How to use it

1
Dose
Weigh your coffee and grind it into the portafilter, ideally with a funnel to avoid waste.
2
Distribute
Level the surface with a WDT tool or distributor so there are no mounds or gaps.
3
Position
Rest the portafilter on a firm surface or tamping mat, handle facing out and wrist straight.
4
Tamp
Press straight down until the coffee stops compressing. You do not need excessive force: what matters is level and repeatable.
5
Check
Lift the tamper without twisting hard, wipe the basket rim and lock in to the machine straight away.

Who it's for

For anyone who wants a perfectly level, repeatable tamp without technique, at home or in the cafe.

Specifications

BrandClockwork Espresso
TypeHand espresso tamper
Base diameter58,5 mm
BaseFlat stainless steel base
HandleBlack anodised aluminium handle
Compatibility58 mm portafilters, ideally with precision baskets such as IMS and VST
barista.gr codeW12928

Care and cleaning

  • Wipe the base with a cloth after use so no coffee oils remain.
  • Wash with lukewarm water and mild detergent when needed and dry straight away.
  • Avoid the dishwasher, as harsh detergents dull anodised aluminium.
  • Do not drop the tamper: a knock to the base edge can spoil the fit.

How to choose

  • Diameter: Match the tamper to your basket. Closer to the walls means less coffee left at the edges and less channeling.
  • Base: A flat base is the standard in specialty espresso. A convex base pushes a little more coffee towards the walls and some baristas prefer it with traditional baskets.
  • Handle: Wood for a warm feel and looks, aluminium for lightness and durability. The handle should fill your palm comfortably.
  • Weight: A heavier tamper does part of the work itself and helps you tamp more steadily.
  • Consistency: If you want the same tamp from every barista, look at calibrated tampers or fixed-depth tampers.

barista.gr tips

  • Level, not hard: Evenness matters more than force. About 10–20 kg is enough, as long as it is the same every time.
  • No tapping: Do not tap the portafilter with the tamper after tamping. It cracks the puck.
  • Combine: With a WDT tool and a scale, the tamper performs at its best.

Frequently asked questions

Is the depth adjustable?
Yes, the depth adjusts to suit your dose and basket.
How much force do I need?
Just press until the coffee stops compressing, usually 10–20 kg. What matters is tamping level and the same way every time.
Flat or convex base?
A flat base gives the most even puck and is the standard in specialty espresso. Convex is a matter of preference and is mainly used with traditional baskets.
How do I know it fits my machine?
Measure the inner diameter of the basket at the top, or send us your machine model and we will tell you the right size.

Clockwork Espresso

Clockwork Espresso became known for the Push Tamper, a tamper that combines a distribution tool and a fixed-depth tamper so that every tamp is level and identical to the last.

Data are provided by the manufacturer and may change without notice. For availability please contact barista.gr.

SPECIFICATIONS
Attribute name Attribute value
Tamper Diameter 58.5mm
Tamper Type Palm tamper
COLOR Black
Manufacturer part number: push-black
Product tags
Customers also bought
Picture of Cafelat Silicone gasket 8.3mm NS
5.53€ 4.46€ excl tax
Lelit 57.35 Levelling Tool
74.10€ 59.76€ excl tax
VIEW