MACAP · Made in Italy
Macap CPS Calibrated Tamper 58 mm
58 mm espresso tamper with stainless steel handle, for an even, level tamp every time.
O 58 mmStainless steel handleFlat base
Espresso tamper with a 58 mm diameter, stainless steel handle and flat stainless steel base.
The Macap CPS is a 58 mm calibrated tamper for professional use, with a constant-force mechanism so every espresso is tamped the same way.
A proper tamper is the tool you use for every single espresso. The base with its accurate diameter compresses the coffee evenly across the whole surface, while the ergonomic handle lets you tamp firmly and level without straining your wrist. The result is less channeling, a more even extraction and espresso you can repeat.
Why tamping makes or breaks espresso
In espresso, water passes at about 9 bar through a bed of ground coffee just a few millimetres deep. Water always follows the path of least resistance. If the coffee is looser in one spot or the surface is tilted, water rushes through there. This is called channeling and produces espresso that is sour and bitter at the same time.
The tamper has a simple but critical job: to compress the coffee into an even, level puck with no gaps. A good tamper of the right diameter covers the whole basket, leaves no coffee on the walls and helps you tamp level, the same way every time.
How to choose the right diameter
The tamper diameter should match the basket, not just the machine name. Most professional and many home portafilters are 58 mm. For precision baskets (IMS, VST, Pullman etc.) with slightly wider walls, a 58.35–58.55 mm tamper gives the best fit, with a gap of only a few tenths of a millimetre.
Other common sizes are 57 mm (e.g. Lelit 57, Cimbali), 53–54 mm (e.g. San Marco, La Spaziale, Breville/Sage 54) and 49–51 mm for lever machines or small portafilters. If you are not sure, measure the inner diameter of the basket at the top rim or send us your machine model.
What is a calibrated tamper
A calibrated tamper has a built-in spring between the handle and the base. When you reach the preset force, the handle gives and you feel or hear that the tamp is complete. That way every espresso is tamped with the same force, whoever is behind the machine.
It is especially useful in cafes with several baristas and for beginners, because it removes one variable from extraction and lets you dial in the espresso with the grind alone.
Key features
58 mm diameter
Accurate fit in the basket for an even tamp right up to the walls.
Base
Flat stainless steel base, for the most even coffee puck.
Handle
Stainless steel handle, light, durable and easy to clean.
For everyday use
Sturdy build for daily use at home or in the cafe.
Consistent force
The spring ensures the same tamp every time.
Ideal for teams
Same result from every barista.
How to use it
1
Dose
Weigh your coffee and grind it into the portafilter, ideally with a funnel to avoid waste.
2
Distribute
Level the surface with a WDT tool or distributor so there are no mounds or gaps.
3
Position
Rest the portafilter on a firm surface or tamping mat, handle facing out and wrist straight.
4
Tamp
Press straight down until the coffee stops compressing. You do not need excessive force: what matters is level and repeatable.
5
Check
Lift the tamper without twisting hard, wipe the basket rim and lock in to the machine straight away.
Who it's for
For cafes with several baristas, barista schools and anyone who wants to remove tamping force from the espresso variables.
Specifications
| Brand | Macap |
| Type | Hand espresso tamper |
| Base diameter | 58 mm |
| Base | Flat stainless steel base |
| Handle | Stainless steel handle |
| Mechanism | Constant-force spring |
| barista.gr code | W11279 |
Care and cleaning
- Wipe the base with a cloth after use so no coffee oils remain.
- Wash with lukewarm water and mild detergent when needed and dry straight away.
- Avoid the dishwasher, as harsh detergents dull anodised aluminium.
- Do not drop the tamper: a knock to the base edge can spoil the fit.
How to choose
- Diameter: Match the tamper to your basket. Closer to the walls means less coffee left at the edges and less channeling.
- Base: A flat base is the standard in specialty espresso. A convex base pushes a little more coffee towards the walls and some baristas prefer it with traditional baskets.
- Handle: Wood for a warm feel and looks, aluminium for lightness and durability. The handle should fill your palm comfortably.
- Weight: A heavier tamper does part of the work itself and helps you tamp more steadily.
- Consistency: If you want the same tamp from every barista, look at calibrated tampers or fixed-depth tampers.
barista.gr tips
- Level, not hard: Evenness matters more than force. About 10–20 kg is enough, as long as it is the same every time.
- No tapping: Do not tap the portafilter with the tamper after tamping. It cracks the puck.
- Combine: With a WDT tool and a scale, the tamper performs at its best.
Frequently asked questions
Should I press harder after the click?
No. As soon as you feel the spring give, the force has reached the right point. Lift the tamper.
How much force do I need?
Just press until the coffee stops compressing, usually 10–20 kg. What matters is tamping level and the same way every time.
Flat or convex base?
A flat base gives the most even puck and is the standard in specialty espresso. Convex is a matter of preference and is mainly used with traditional baskets.
How do I know it fits my machine?
Measure the inner diameter of the basket at the top, or send us your machine model and we will tell you the right size.
Macap
Macap is an Italian company with a long tradition in espresso grinders for professional and home use. Besides grinders, it also makes accessories for the barista workstation.
Data are provided by the manufacturer and may change without notice. For availability please contact barista.gr.